Large-scale plasmonic-SERS templates by successive growth steps

This work presents the fabrication of large-scale tunable-plasmonic surface-enhanced Raman scattering (SERS) templates and investigates their Raman enhancement. Substrates for SERS were prepared by deposition of gold nanoparticles on a glass slide followed by their growth. A plasmon shift was observed upon growing due to the formation of elongated nanoparticles and their mutual coupling. The changes in particle size, shape and interparticle distances were indicated by SEM measurements. Surface-enhanced Raman spectra of Nile blue A at a very low concentration on top of a blocking layer were measured. The overall Raman enhancement is correlated with the number of growth steps. For excitation at 532 nm four growth steps lead to maximum enhancement. Better overlap of excitation laser and the plasmon resonances upon growing increased the enhancement until four steps while further growing decreased the enhancement. At longer wavelengths excitation (633 and 785 nm) the enhancement further increased beyond the fourth growth step. This enhancement is caused by the plasmon excitation of narrower gap sizes. The proposed procedure for the SERS substrates is simple, allows covering large surface areas and plasmon band tuning from 530 nm to the near infrared in order to increase overall Raman enhancement.     

Heteronuclear Cross‐Relaxation Effects in the NMR Spectroscopy of Hyperpolarized Targets

Dissolution dynamic nuclear polarization (DNP) enables high‐sensitivity solution‐phase NMR experiments on long‐lived nuclear spin species such as ¹⁵N and ¹³C. This report explores certain features arising in solution‐state ¹H NMR upon polarizing low‐γ nuclear species. Following solid‐state hyperpolarization of both ¹³C and ¹H, solution‐phase ¹H NMR experiments on dissolved samples revealed transient effects, whereby peaks arising from protons bonded to the naturally occurring ¹³C nuclei appeared larger than the typically dominant ¹²C‐bonded ¹H resonances. This enhancement of the satellite peaks was examined in detail with respect to a variety of mechanisms that could potentially explain this observation. Both two‐ and three‐spin phenomena active in the solid state could lead to this kind of effect; still, experimental observations revealed that the enhancement originates from ¹³C→¹H polarization‐transfer processes active in the liquid state. Kinetic equations based on modified heteronuclear cross‐relaxation models were examined, and found to well describe the distinct patterns of growth and decay shown by the ¹³C‐bound ¹H NMR satellite resonances. The dynamics of these novel cross‐relaxation phenomena were determined, and their potential usefulness as tools for investigating hyperpolarized ensembles and for obtaining enhanced‐sensitivity ¹H NMR traces was explored.     

纳米银对铕配合物荧光性质的影响(英文)

研究了纳米银对稀土铕-吡啶-2,6-二羧酸配合物(Eu(Ⅲ)C7H5NO4,Eu(Ⅲ)DPA)的荧光性质的影响。随着纳米银浓度增加,荧光强度先增强而后逐渐下降。较大粒径的纳米银使Eu(Ⅲ)DPA荧光增强效率较大,且达到最大荧光增强效率所需的纳米银浓度较低。在高浓度Eu(Ⅲ)DPA溶液体系中,纳米银导致荧光猝灭。电偶极子跃迁发射荧光增强效率大于磁偶极子跃迁发射荧光增强效率。分析认为,纳米银对Eu(Ⅲ)DPA荧光性质的影响与表面等离子体共振与激发态荧光中心强烈耦合以及表面等离子体再吸收有关。同时,纳米银对铕配合物的不对称率有影响,其影响因素与局域电磁场增强,折射率以及配位场有关。     

负载氧化钒催化剂的多波长拉曼光谱研究:结构识别和定量

探究负载金属氧化物的结构是确立催化剂结构和催化性能之间相互关系的首要条件. 在众多表征技术中,多波长拉曼光谱结合了共振拉曼和由不同波长激发的非共振拉曼,不仅在识别负载金属氧化物团簇的结构,而且在定量方面已经成为强有力的工具. 本文以两个负载氧化钒体系(VOx/SiO2,VOx/CeO2)为例,阐述了如何利用该技术研究活性氧化物团簇的多相结构,并理解氧化物团簇和载体之间复杂的相互作用. 由多波长拉曼光谱得到的定性和定量信息能为设计更有效的负载金属氧化物催化剂提供基本的依据.     

Ag/ZrO2-NT/Zr hybrid material: A new platform for SERS measurements

In this paper, we present recent results of our attempts to produce nanoporous zirconia, as well as our investigations of a hybrid material consisting of nanoporous zirconia loaded with Ag-nanoparticles, Ag-n/ZrO₂-NT/Zr, which could be used as an active SERS substrate. The Zr-based hybrid material, as our investigations have shown, is an active and stable substrate in SERS investigations aimed at detecting various organic molecules: mercaptobenzoic acid, pyridine and two different dyes – rodhanine derivatives. The SERS spectra for the probe molecules adsorbed on silver nanoparticles on a ZrO₂-NT/Zr platform display characteristic intensity ratios different from those measured on previously studied nanoporous substrates based on Ti and Al, which ensure a different (alternative) interaction between the investigated adsorbate and adsorbent. In order to characterize our new substrate we used high-resolution SEM and surface analytical techniques: XPS (X-ray photoelectron spectroscopy) and SERS (surface enhanced Raman spectroscopy).     

Pressure-Suppressed Carrier Trapping Leads to Enhanced Emission in Two-Dimensional Perovskite (HA)2(GA)Pb2I7

A remarkable PL enhancement by 12 fold is achieved using pressure to modulate the structure of a recently developed 2D perovskite (HA)₂(GA)Pb₂I₇ (HA=n-hexylammonium, GA=guanidinium). This structure features a previously unattainable, extremely large cage. In situ structural, spectroscopic, and theoretical analyses reveal that lattice compression under a mild pressure within 1.6 GPa considerably suppresses the carrier trapping, leading to significantly enhanced emission. Further pressurization induces a non-luminescent amorphous yellow phase, which is retained and exhibits a continuously increasing band gap during decompression. When the pressure is released to 1.5 GPa, emission can be triggered by above-band gap laser irradiation, accompanied by a color change from yellow to orange. The obtained orange phase could be retained at ambient conditions and exhibits two-fold higher PL emission compared with the pristine (HA)₂(GA)Pb₂I₇.     

Enhancing the performance of TFC nanofiltration membranes by adding organic acids in polysulfone support layer

Throughout this study, the effect of certain organic acids, methacrylic acid, lactic acid and tartaric acid, doped in polysulfone (PSF) casting solution onto the performance of nanofiltration (NF) membranes was investigated. Different NF membranes have been prepared from m-phenylenediamine and trimesoylchloride onto the top surface of the acid-modified PSF membranes through regulating the concentration and contact time of the conventional interfacial polymerization process. The study of scanning electron microscopy (SEM) was used to investigate the influence of acids on the morphology of membranes and cross-sectional structures. The functional groups, hydroxyl and carboxylic acid, of the acids have resulted in a significant increase in membrane thickness, porosity and hydrophilicity, with a decrease in macrovoid capacity of the PSF layer. The acid-modified PSF/TFC membranes showed higher rejection of salt, with an increment in water flux compared to the neat membrane. Water flux and salt rejection (R_s %) of the control membrane was 7.6 L/m² h and 65.4%, whereas polysulfone/methacrylic acid (PSF/MAAc), polysulfone/tartaric acid (PSF/TAc), and polysulfone/lactic acid (PSF/LAc) were 16.8, 18.5, and 20.2 L/m² h and 88, 88.2 and 94.1%, respectively. Efficiency of prepared NF membranes under various inlet pressures and specific salts was investigated with selectivity and salt rejection. The salt rejection of a mixed salt solution was found to meet the order of R_s % CaSO₄ ≥ R_s % Na₂SO₄ ˃ R_s % MgSO₄ ˃ R_s MgCl₂ ˃ Rs % NaCl.     

超高分子量聚乙烯烧结制品的链缠结调控及其对性能影响

利用新的单中心Ziegler-Natta(Z-N)催化剂,通过干预分子链的生长与聚集行为,可获得低缠结的超高分子量聚乙烯(UHMWPE)初生树脂.本研究利用这类低缠结UHMWPE,通过设置不同的烧结温度(Ts)来改变熔体缠结状态,并探讨了链缠结程度对烧结制品结构与性能的影响.实验结果表明TS=220℃下,UHMWPE样品发生显著的复缠,造成高缠结度;而Ts=170℃下,初始低缠结状态能够得以充分保留,从而获得了缠结度具有明显差别的不同样品.示差扫描量热法(DSC)测试表明,在Ts=170℃下,低缠结度有利于在随后等温及冷却结晶过程中生成高熔点(最高达141℃)晶体与高的结晶度(最高达65%).力学测试表明低缠结度制品的综合力学性能显著提升,其中屈服强度提高72%,拉伸断裂强度提升139%,弹性模量提升162%以及断裂伸长率提升36%,实现了同时增强增韧.这就提供了一种从调节链缠结温度实现UHMWPE烧结制品高性能化的新思路.     

基于竞争配位的Ca2+特异性响应1H/19F磁共振成像分子探针

合成了一种含~(19)F的Mn~(2+)配合物3,12-二(2-氧代-2-((2,2,2-三氟乙基)氨基)乙基)-6,9-二氧杂-3,12-二氮杂十四烷酸锰(Ⅱ)(Mn(Ⅱ)-L,1),可实现对Ca~(2+)特异响应的~1H/~(19)F磁共振成像分析。~(19)F核在近距离的顺磁性Mn~(2+)影响下产生了顺磁弛豫增强作用,使~(19)F的横向弛豫时间T_2急剧缩短而磁共振信号锐减。当有Ca~(2+)存在时,与配体L的竞争配位使得~(19)F远离Mn~(2+)离子,从而~(19)F磁共振信号得到恢复。同时,由于Mn~(2+)离子从配合态变为游离态,水配位数增加使得其对~1H的纵向弛豫时间T_1弛豫性能增加,从而~1H磁共振成像信号也增强。相关实验的结果证实了该配合物是一种能对Ca~(2+)特异性响应的~1H/~(19)F磁共振成像探针。